How to keep your stick vacuum powerful: 5 simple tips

Your stick vacuum always works best the first time you use it. But is it vacuuming less well now? That's no reason to buy a new one straight away. With a few simple steps you can often improve the suction power considerably. Below you'll find 5 practical tips to keep your vacuum in top shape.

1. Empty and clean the dust container regularly

An overfull dust container is one of the biggest causes of reduced suction power. So empty it in time, but also give it a really good clean now and then. Take the cyclone filter out of the dust container for a better clean. Rinse it with water or mild soapy water, let it dry thoroughly, and you prevent dirt from building up.

2. Don't forget the filter

The filter catches fine dust and dirt, but that also means it slowly gets clogged. And you notice that in the suction power. Check the manual for how to clean the filter, and replace it at least once a year. That way your vacuum keeps working smoothly and powerfully.

3. Remove hair from the brush roll

The rotating brush in the nozzle can get clogged with hair or threads. As a result it turns less well and picks up dirt less effectively. Take the brush out (often very easy), cut the hair loose with scissors, and it turns like new again.

4. Check for blockages in the tube

Small objects such as toys, rubber bands or pieces of plastic can get stuck in the tube or hose unnoticed. That can seriously block the airflow. So check now and then whether something is stuck, and remove it if so.

5. Make sure the battery is properly charged

With an almost empty battery, the vacuum may suck less powerfully. Planning a bigger cleaning job? Then make sure you fully charge the battery first. That way you get the most out of your vacuum.

A stick vacuum is very handy, but to enjoy it for a long time, maintenance is crucial. Fortunately, that doesn't have to take much time at all. With these simple tips your vacuum stays powerful and reliable.

1. Empty the dust container regularly

If you use the vacuum with a full container, it affects the suction power and can damage the filter. So empty the dust container after every cleaning session. Also clean the container now and then with a dry cloth to prevent built-up dirt.

2. Give the filters some attention every month

Dust and dirt get stuck in the filter, and that affects not only the air that comes out, but also the performance of the vacuum. Tap out the filter every month. Do you vacuum daily? Then it's smart to replace the filter every six months. Check your vacuum's manual to see if the filter is washable.

3. How to take good care of the battery

A few simple habits can considerably extend the life of your battery:

• Fully charge the battery before using the vacuum for the first time.
• Never let the battery run completely empty, that prevents unnecessary wear.
• Is the battery full? Then take it off the charger.
  

Want to vacuum a bit longer without charging in between? Then an extra battery is definitely worth considering.

4. Check for blockages

Sometimes your vacuum unknowingly picks up something that gets stuck. Think of fluff, hair or small objects. This can seriously reduce the suction power. So regularly check:

• The nozzle
• The tube or wand
• The filters
• The dust container

By keeping these parts clean, your vacuum keeps working smoothly and you don't lose any power.

The battery lasts 90 minutes in normal mode. To vacuum for longer, proceed as follows:

1. Don't use turbo mode by default. In this mode the battery lasts 20 minutes. Use normal mode as much as possible, it is very powerful in itself.

2. Make sure the dust container is as empty as possible. The fuller the container, the harder the motor has to work, which drains the battery faster.

3. Clean your filters regularly. This improves the performance of the battery.